Toilet Installation Cost in 2026: Replacement, Labor & Extras
By Blixxy Editorial Team · Updated 2026-11-06
Quick answer: Most homeowners pay about $250 to $800 to have a toilet installed in 2026, with an average around $450 including the toilet. Labor alone usually runs about $150 to $440. Swapping a standard toilet in the same spot is the cheapest job; moving the drain, fixing a rotted floor or installing a smart or wall-hung toilet can push the total past $1,000.
Key takeaways
- Typical installed cost: about $250–$800; average around $450.
- Labor only: about $150–$440 for a standard swap.
- Plumbers often charge about $75–$150 an hour.
- Upflush, pressure-assist and smart toilets cost more to install.
- Hidden extras: a corroded flange, seized shut-off valve or soft subfloor.
How much does it cost to install a toilet?
Price depends mostly on two things: the toilet you buy and whether the plumbing can stay where it is. A straight swap is mostly labor: shut off the water, pull the old toilet, set a new wax ring, then set, level and connect the new one.
| Job | Typical cost |
|---|---|
| Labor only, standard swap | $150–$440 |
| Basic toilet + installation | $250–$800 |
| Dual-flush toilet installed | $250–$1,200 |
| Pressure-assisted toilet installed | $500–$2,000 |
| Upflush toilet installed | $600–$1,300 |
These are planning ranges, not quotes. Use the free estimator above to price your own job.
Extra costs to plan for
- Broken or corroded flange: the ring that anchors the toilet to the drain often needs replacing on older homes.
- Seized shut-off valve: a stuck valve under the tank is cheap to replace while the toilet is off.
- Soft or rotted subfloor: a slow leak can rot the floor under the toilet, which has to be fixed before setting a new one.
- Moving the drain: relocating a toilet means new drain and supply lines, often several hundred dollars or more.
- Haul-away: some pros charge to dispose of the old toilet.
Plumber or handyman?
A handy homeowner or experienced handyman can usually swap a toilet in the same spot. Hire a licensed plumber when the flange or drain needs work, when you're moving the toilet, or when there are signs of a leak into the floor.
Find a plumber near you or a handyman near you. For hourly rates, see our plumber cost guide.
How to pay less for toilet installation
- Buy the toilet yourself and measure the rough-in first (usually 12 inches from the wall to the drain center).
- Keep the same location to avoid new plumbing.
- Bundle jobs like a new faucet or shut-off valve into the same visit.
- Fix leaks early so the subfloor doesn't rot.
- Set your own price on Blixxy. Post the job with photos, get a free AI estimate, and choose your budget. The first available local pro accepts, and your payment is held until the job is done.
Frequently asked questions
How much does it cost to install a toilet?
Most toilet installations cost about $250 to $800 in 2026, averaging around $450 including a basic toilet.
How much do plumbers charge to install a toilet?
Labor for a standard toilet swap usually runs about $150 to $440. Plumbers often charge about $75 to $150 an hour.
How long does it take to replace a toilet?
A straight swap usually takes one to two hours. Flange, valve or floor repairs add time.
Is it cheaper to repair or replace a toilet?
Small fixes like a flapper or fill valve are much cheaper than replacement. Replace the toilet if it's cracked, rocks after the flange is fixed, or keeps clogging.
Sources
- How Much Does It Cost to Install a Toilet? (Fixr)
- Cost to Install a Toilet – 2026 Price Guide (Inch Calculator)
Post your job on Blixxy and get a free AI price estimate.